SCHÜTZ - srewable ball valve DN 50 / + seal / handle violet) / alu nut *

SCHÜTZ Ball Valve DN50 ALU

SCHÜTZ Ball Valve DN50 ALU with free-rotating aluminum conical nut at the valve inlet.

The valve is shipped with a suitable EPDM or Viton gasket.

Anti-rotation device and tamper-evident seal (red) are not included.

Tap inlet thread S75x6 IG

- resulting thread diameter 75mm 

- thread pitch 6mm

Tap inlet thread S60x6 IG

- resulting thread diameter 60mm

- thread pitch 6mm

The valve tightening torque is approximately 70 Nm.

This ball valve is only compatible with the Schütz IBC of the LX, MX, and SX series (excluding EX) with an aluminum conical nut.

The SCHÜTZ valve can be identified by the SCHÜTZ logo embossed on the top of the handle.

Your previous defective tap must also have an aluminum union nut.

If you no longer have your old tap,

your inner container MUST NOT have an eyelet on the top right of the tap's connection thread.